Adjustable Air Amplifier with Gauged Markings
Product Overview
The Nex Flow™ Adjustable Air Amplifier with gauged markings are used for a variety of applications. These are available in anodized aluminum and marked accurately to set the gap from 0 to 1.5 mm.
These adjustable air amplifiers can be mounted and maintained easily which means that compressed air consumption and noise levels are reduced. It takes energy from a small volume of compressed air to produce high velocity and high volume as well as low-pressure output airflow. This adjustable air amplifier is quiet, efficient and can amplify flows up to 16 times of the input air consumption rate.
Air Booster and Air Pressure Amplifiers:
An Air Amplifier is also called an Air Booster. It converts pressure to flow and considered flow amplifier and not an air pressure amplifier.
Dust Collection System and Vent Smoke and Fumes:
The air amplifier is used as dust collection system. It can vent smoke and fumes from all types of equipment.
Dry Air Coolers:
Air amplifiers can be used as dry air coolers by blowing amplified airflow into tubes of hot gas and air for cooling systems.
Part Ejection System and Chip Removal System and Part Drying System :
Air Jets and Air Nozzles are excellent as a Part Ejection System, Chip Removal System and as a Part Drying System when air knives or amplifiers are not suitable.
How They Work
Adjustable Air Amplifier - A large volume of surrounding air is induced into the amplifier at point (A) by the action of a small amount of compressed air which enters the annular chamber at point (B) that is then throttled through a small ring nozzle at high velocity and into the inside of the amplifier over a coanda profile. The compressed air stream clings to the coanda profile as it enters the inside walls of the amplifier creating a vacuum that induces the outside air converting the pressure into amplified airflow. The amplified airflow leaves at the exit at point (C). Airflow is further amplified downstream at point (D) by entraining additional air from the surroundings at the exit.
Specifications
Constructed of anodized aluminum with two standard outlets (outside) diameters: 1-1/4" (31mm), 2" (51mm),
Come standard with a .002" (.05mm) gap. If greater air force is required, the gap is adjustable from 0 to1.5mm and easily set using the markings on the air amplifier and held in place after setting with a lock ring. .
Adjustable Air Amplifier Gauged Ratios (approx.):
Model 40001G: 15:1
Model 40002G: 16:1
Outside Diameter Of Outlet |
Model |
A |
B |
C |
D |
E |
F |
G |
H |
NPT* |
|
1-1/4" |
40001G |
in |
2.0 |
1.25 |
1.0 |
.98 |
1.38 |
1.88 |
2.88 |
1/4" |
18 NPT |
0 |
0 |
mm |
50.8 |
31.8 |
25.4 |
24.9 |
35 |
47.8 |
73.2 |
||
2" |
40002G |
in |
3.0 |
2.0 |
1.06 |
1.64 |
1.5 |
2.25 |
3.25 |
3/8" |
18 NPT |
0 |
0 |
mm |
76.2 |
50.8 |
26.9 |
41.7 |
38 |
57.2 |
82.6 |
* BSP Adaptors Supplied Upon Request Free Of Charge
(Fig. Adjustable Air Amplifier)
Applications
Replaces fans used for blow-off, cleaning, drying, cooling and conveying.
Automotive:
- Remove water, coolant, dust, and scrap in parts manufacturing/assembly operations.
- Cool enamel and water based paints in parts manufacturing, auto body shops or assembly lines.
Bottling:
- Blow off of water from the tops of cans, bottles prior to labeling, ink jetting, palletizing or packaging.
- Conveying light materials.
Chemicals:
- Blow off of chemicals or water prior to labeling or packaging.
Food:
- Remove water from product or packaging.
General Manufacturing:
- Part ejection, fume removal, dust and liquid blow off from all types of parts, conveying away waste. Replaces fans in some cooling operations such as tempering glass.
Metals:
- Coolant and other liquid removal on process lines from aluminum, steel, brass or other materials.
- Drying metals prior to other operations such as plating or polishing.
- Cooling metal parts prior to coating or painting. Coolant mist removal.
- Boost vacuum systems to remove grinding dust. Cool steel forgings.
Paper & Lumber:
- Sawdust removal and control by boosting the vacuum system, dust removal.
- Trim removal in converting applications.
Plastic:
- Dust and scrap blow off.
- Cool moldings after extrusion, then blow off and dry prior to forming.
Printing:
- Cooling to set some inks, scrap blow off.
Pharmaceutical:
- Remove liquid prior to labeling or packaging waste removal for solid materials.
- Extract unfilled capsules by vacuum as they pass on a conveyor.
Textile:
- Scrap and trim removal on textiles to eliminate expensive vacuum systems.
Air Consumption
Compressed Air Consumption (Based on gap of 0.002" (.05mm)) Consumption in SCFM. (SLPM):
| Inlet Pressure | 40001G | 40002G |
| 20 PSIG (1.4 BAR) |
4.5 (127.4) |
8.0 (226.5) |
| 40 PSIG (2.8 BAR) |
7.5 (212.4) |
12.0 (339.8) |
| 60 PSIG (4.1 BAR) |
10.3 (291.7) |
16.5 (567.2) |
| 80 PSIG (5.5 BAR) |
12.5 (354.0) |
21.5 (608.8) |
| 100 PSIG (6.4 BAR) |
14.0 (396.4) |
26.0 (736.2) |
| 120 PSIG (8.4 BAR) |
17.5 (495.5) |
30.0 (849.5) |
Adjustable Air Amplifier Ducting:
Both the inlet (vacuum intake) and discharge ends may be ducted for light material and fume conveying applications. Care must be taken to avoid unnecessary restrictions that will cause back pressure or suction resistance that will reduce performance levels. Keep back pressure and resistance to under 2" of water column.
More Information
